M02 | Equipment Layout Revisions & Coordinate Checks

An equipment-layout revision case focused on keeping related drawings and coordinates consistent. The task connects to my mechanical-construction work at Samsung Engineering (March 2014–July 2021), including heavy-load transport and installation planning, calculations and drawing review. These are new fictional exercise drawings, not company records or a client project.

THE TASK

Move equipment B by +600 mm X and +500 mm Y, raise its base by 150 mm, and revise the access-opening conditions. Carry the changes through the layout, front reference view, connection point and hole-coordinate schedule.

WORKFLOW

Preserve REV00 and the input assumptions; mark three redline instructions; issue REV01; extract eight hole centres from the CAD geometry; reconcile local/global coordinates and connection points against a change matrix.

DELIVERABLES & CHECKS

Six Japanese A3 case-study pages; editable layout DXF for REV00/REV01 in millimetres at 1:1; native FCStd and STEP; coordinate CSV and check records. Save/reopen, native parameter edits, STEP reimport and DXF hole-coordinate/dimension checks were performed. The DXF covers the layout, while the case PDF also explains the revision and interface checks.

SCOPE & PROVENANCE

AI-assisted, self-initiated exercise using fictional supplied conditions and simplified equipment envelopes. My role is drafting, revision management and dimensional/coordinate consistency. This is not client work, manufacturer/fabrication/construction approval, anchorage or strength design, piping design, lifting/transport safety verification or code compliance. The access check is a rectangular dimensional comparison only.

FOR A SIMILAR ASSIGNMENT

I can discuss source-based equipment-layout redrawing, redline revisions and interface/coordinate documentation. Deliverable compatibility, fixed scope and fee, schedule and revision allowance are agreed before work.